(888) 288-3282
[email protected]

RAID 0 Data Recovery Services

DataTech Labs® provides fast, professional data recovery services. Our RAID 0 expert recovery engineers will work around the clock to ensure your critical data is retrieved quickly.

We understand that each customer’s situation is unique, so we will analyze each hard drive in your RAID array to determine the best recovery method for each of our clients.

A RAID 0 array requires a minimum of two hard disks. Data is stripped between the disks in increments of 64 or 128 KB (normally). This configuration offers no protection against data loss since there is no parity information for redundancy.

This type of RAID setup does, however, offer increased performance. Because multiple drives read a single file at the same time, read performance from the array is higher.

There is less of a difference in write time, and the performance ratio decreases as the number of drives in the array increases.

Data Tech Labs has the skills, tools, and expertise to facilitate this recovery service. Call us for more information.

What is RAID 0?

This particular RAID array is a set of drives (minimum of 2) where data is stored in a series of stripes. Striping is where fragments of the aggregated data are written sequentially across each disk in the set.

The fragments of data are then simultaneously written and read from the set of disks but treated as a unified system.

Because fragments of data can be retrieved from multiple disks simultaneously, a set of RAID 0 drives have a higher performance rate and more access to usable storage compared to a single disk drive.

However, these arrays are without parity or redundancy. This means that the fragments of data stored on each disk are only on that specific disk and not repeated anywhere else in the array.

When one sector on one of the disks fails, however, the corresponding sector on every other disk is rendered useless because part of the data is now corrupted.

raid 0 data recovery

Simply said, if one drive fails, all the data is unreadable and needs professional help.

For this reason, experts refer to this RAID type as the “unrecoverable array type.” The more disks in the array, the more likely a disk could fail, leading to a higher data loss risk.

This “no-fault tolerance” can be devastating if a disk in your array becomes damaged or fails. With a RAID 0, always ensure you have a separate backup system. You keep a copy of your entire data set in case of disk failure.

Some Typical Scenarios That Cause Data Loss Include:

  • Hard Drive Failure
  • Controller Failure
  • Hardware trouble or failure
  • Virus and File Corruption
  • Formatting or Deleting Files

For Additional RAID Levels, Select:

What To Do When A RAID 0 Drive Fails:

For any drive failure, it is essential to act quickly to minimize the chances of permanent data loss. Immediately shut down the RAID and do not attempt to restore or rebuild it.

Although there is commercial data recovery software, using these programs can reduce the chance of successful full recovery due to overwriting over damaged data.

Similarly, if there is internal damage to your drive, running these commercial software programs can cause further damage and lead to permanent file loss. For best chance of recovery, keep the RAID shut down and call DataTech Labs ® for professional assistance.

DataTech Labs’ Experience With RAID 0

At DataTech Labs, our RAID recovery engineers have extensive experience with RAID data recovery. We have developed custom and proprietary tools and techniques to recover RAID data successfully.

We have recovered everything from 2-disk RAID 0 stripes to multi-terabyte 24-disk RAID 0 arrays.

If you’ve been to another recovery company and they have failed your job, call us. We will repeatedly recover where others fail.

  • We have one of the highest recovery rates in the industry
  • We have trained engineers who specialize in RAID recovery
  • We have a dedicated Clean Room to look at your RAID safely and securely
  • We repeatedly recover what other recovery companies found to be “unrecoverable”
  • We work with you to offer fair and competitive pricing
  • We offer emergency 24/7 service

Trust DataTech Labs For Your Data Recovery Needs

DataTech Labs prides itself on outstanding customer experience. Our number one goal is to your retrieve lost data with local support and data and file recovery experts ready to answer any of your questions. With hundreds of positive reviews, you can trust DataTech to provide the best service.

Book a one-on-one consultation with our expert RAID 0 technician today!